background image

A – Automatic parboil

 

 
- This function is available in order to reach the required heat setting in a short time 
1. Select the required cooking zone 
2. Move the slide touch field to position “A” or select it directly 
- The power setting is maximized and the zone display shows A. 
- After 5 minutes, the level is automatically switched to level 16

 

Timer

 

 

 

After you have selected the power press the timer key 

.  

Timer confirmation:

 

With repeated pressing onto timer key choose the zones you want to set as the LED light showing. 
The display shows "00". With the keys "0-9" set the time in 1-minute steps (max. 99 min.) After 5 
seconds no number level key be pressed, the time will start timing and the display will indicate the 
countdown time until to “00”. If the two zones has been set different time, the display will indicate the 
less time setting zone. 

Timer cancellation

 

By pressing onto timer key choose the zone you want to cancel the timer. Then press number level 
key”0” two times and the timer function will be cancelled. 

Safety systems 

In order to protect the electronics from overheating if the control unit detects excessive heat it will 
switch off the hotplate closest to the sensors and the letter H will appear on the display. This hotplate 
can be activated when the temperature of the electronic unit returns to normal. 
Each hotplate is equipped with an interior temperature limiter that switches off the hotplate if the 
radiant surface is heated excessively. 

If any cracks appear in the radiant surface, immediately disconnect it from the mains. Do not use any 
part of the cooktop until a new radiant surface has been fitted. 

Automatic 

If a hotplate is left on accidentally, it will automatically be switched off after a period of time has 
elapsed, depending on the power level that has been selected 

 

 

 

 

 

 

Key Lock (Childlock)

  

 

To ensure the safety of children, the ceramic hob is fitted with an interlock device. To lock: hold down 
the “Inter lock” key  for 3 seconds; the hob then goes into “Interlock” mode, the timer shows “L0” and 
the rest of the keys are disabled. To unlock hold down the lock key for 3 seconds and the hob will 
return to normal working. 

Setting 

Time (hour) 

1-3 

4-6 

7-9 

Summary of Contents for NC-10209SL















Reviews: