The receiver also includes a channel selector switch with an indicator. Each receiver can
accommodate up to four different transmitters operating at four different channels. By
scrolling through the channels, the images transmitted by the individual transmitters can
be displayed.
TURN-ON PROCEDURES
TRANSMITTER
1.
Connect dipole antenna to transmitter antenna port
2.
Connect video-output from camera to video-input port on the transmitter
3.
Connect power (or battery) to the transmitter
RECEIVER
4.
Connect antenna to receiver antenna port
5.
Connect video-output port to video-input on a monitor
6.
Turn monitor on
7.
Connect cigarette lighter adapter to cigarette lighter
OR
8.
Connect power port to wall adapter
Once the procedures are complete and the camera is on, “CHANNEL 1” will appear on
the bottom of the screen. This is an indication that the receiver is functional. If the
transmitter is functioning, there will be a live picture on the screen. If the Channel
indicator is on a gray screen, check for proper channel selector by scrolling through all
four channel. If the gray screen is still present, this is an indication that the transmitter
may not be functioning properly.
