Nesis III User’s Manual
10.3
Updating with USB Stick
10.3.2
Copying Update File to the USB Stick
The downloaded file must be copied to the USB stick. We recommend copying
it to the root folder.
Important: Once file was copied, please make sure that the USB stick is safely
removed from PC. This makes sure that all files are properly copied and closed
before the stick is actually removed from PC.
10.3.3
Performing the Update
Once the update file is on the USB stick follow the steps below: Please note
that touch screen is not working in the Nesis update mode.
1. Insert the USB stick with the update file into USB port.
2. Select
Options
from the main menu and then select the
Update
icon and
confirm the decision. If option
User Password
is enabled the user must
provide standard password
314
. Nesis will restart in special update
mode.
3. Upon restart a window similar to Figure 84a opens. Select the
Update
option.
4. A window similar to Figure 84b opens with kus files listed. Normally,
only one file is listed. Select the update file (kus file) and push the knob.
The update process is now started.
(a)
Nesis update mode options.
(b)
Update file selection.
Figure 84:
Special update mode example.
Once update process has been started, do not cancel or terminate it. Make
sure that battery is sufficiently full. The update process may take a few
minutes.
113
©
Kanardia
2018-2022