Variometer — Manual
2.2
Connections
(a)
57 mm
(b)
80 mm
Figure 2:
Instrument panel cutout and mounting hole. Note: Figures
are not in scale.
It is highly recommended to keep the static tubing as short as pos-
sible. The tubing must avoid sharp bends and twists. The tubing
must be airtight. Water must not be allowed to enter the tubing.
It is strongly recommended to label each tube before connecting to
Indu Variometer. This will help a lot if you ever have to remove and
re-install the instrument.
2.2.2
CAN Bus -
CAN
Connection to the CAN bus is optional and is not required for the
normal operation.
Use standard RJ45 ethernet cable to connect it with other
Kanardia
equipment.
When connected to the bus, vaiometer will transmit vertical speed
to other units connected on the bus.
8
©
Kanardia
2015 - 2020
