Altimeter — Manual
8. Slave Version
Figure 9:
CAN bus power protection example. Only part connected
to the red connector is protected. The other (blue) part
will shut off when system bus fails.
8
Slave Version
A slave version of Indu Altimeter also exists. The slave version does
not have its own sensors and depends on some external master device.
The master and slave devices must be connected with CAN bus.
The slave must get all information from the CAN bus. If any of the
information is missing a red cross will appear on the LCD display
over the part for which the information is missing.
In the case of slave Altimeter, one of the following devices can be
used as master: Horis, Emsis PFD, Aetos PFD, Nesis PFD, Indu
Combo and standard Indu Altimeter.
For the reasons mentioned above, the following parts of this manual
do not apply for the slave Altimeter.
•
•
3.2 Airspeed Adjustment - Auto Zero.
•
•
27
©
Kanardia
2015-2020
