Aetos Installation Manual
16. Autopilot
16
Autopilot
Autopilot installation and tuning are described in a special manual. The
manual can be found on our web site.
17
Special
In very rare cases, some special system commands may be issued. These
commands are needed neither during installation nor during operation. They
may come handy in the case of instrument malfunction or during low level
factory setup.
Each of these commands is protected by unique password. Selecting the
Spe-
cial
icon opens window shown on Figure 72. If correct password was entered,
the appropriate command is executed.
Figure 72:
Each special command is protected by password.
The
special
commands are not listed. They are given only on request directly
to the OEM or to the user.
18
CAN Devices
Selection of the
CAN Devices
icon opens a list of devices connected to the
CAN bus. The list is mostly informative. However, some configuration actions
are also possible for certain device types.
18.1
Indu/Digi Layout Change
Aetos can upload a new LCD layout file to all devices from the
Indu
group
(round instruments with a needle and LCD display and Digi). The LCD
layout is stored in a binary file with the
isb
extension.
1. The new LCD layout file for some specific devices is typically obtained
from Kanardia customer support as an email attachment.
78
©
Kanardia
2019–2020
