6. Responsibilities of the user
The user is obliged to allow only personnel trained in the current regulations concerning safety and
hygiene at work, as well as familiarized or trained in operating the lever.
Knowledge of the safety and operating regulations must be verified at regular intervals in accordance
with the applicable regulations.
7. Responsibilities of the staff
All employees, assigned to operate the lever, are obliged to:
•
observe the occupational safety and health regulations as well as the safety recommendations
in this manual.
Page 8 of 13
NOTE!
It is forbidden to operate a damaged lever.
8. Hazards associated with the use of lever
The lever has been constructed in accordance with the recommendations of the General Product
Safety Directive 2001/95/EC and good engineering practice. However, failure to follow this manual
when operating the tool may result in danger to the life or health of the operating personnel or third
parties as well as damage to the lever or other property.
This lever must only be used:
•
for its intended purpose,
•
if the technical condition is impeccable and unobjectionable,
•
when service and repairs are performed only by authorized personnel.
9. Use of the lever in accordance with its intended purpose
The purpose of lever is defined in point 3 of this manual.
The intended use also includes:
•
observance of all recommendations resulting from the operating manual,
•
perform inspections and maintenance in a timely manner.
Use for purposes other than or in addition to those specified above shall be considered misuse.
SKORPION® Lever WS-016 type
Operating Manual (Rev. 1)
