Kamstrup ULTRAFLOW 54 H Technical Description Download Page 85

Page: 85 / 92

ULTRAFLOW® 54 (H)/(J)

Kamstrup A/S ∙ Technical Description ∙ 5512‐1554_J1_GB _04.2018

11.3

Settings

Clicking on the button “Settings” the following parameters can be changed:

”Select language”:

The program language can be changed to 6 different
languages: Danish, German, English, French, Polish
and Russian.

Figure 72. Select language.

”COM-port settings”:

The COM-port can be selected manually instead of the
automatically selected default setting.

Figure 73. Select COM-port.

”Update program”:

The METERTOOL program can be updated online if a
newer revision is available on Kamstrup's FTP-server.

Figure 74. Update program.

”Update database”:

The METERTOOL data-bases
can be updated online if
newer revisions are
available on Kamstrup's FTP-
server.

Figure 75. Update database.

”Backup or Restore
databases”:

This function is not used for Pulse Divider.

”Install the USB-driver”:

This function enables (re)installation of the USB-driver, which is used for the interface
cable.

Summary of Contents for ULTRAFLOW 54 H





























































































Search results

Summary of Contents for ULTRAFLOW 54 H

Reviews:

Related manuals for ULTRAFLOW 54 H

Brands by name

Popular brands

Kamstrup ULTRAFLOW 54 H, Technical Description

Search results

Summary of Contents for ULTRAFLOW 54 H

Reviews:

Related manuals for ULTRAFLOW 54 H

Brands by name

Popular brands