Kamstrup ULTRAFLOW 34 DN15-125, Technical Description, Page: 65 / 86

ULTRAFLOW® 54/34
Kamstrup A/S · Technical description · 5512-2464_A1_GB_08.2019
65
In ULTRAFLOW® 34 the electronics is encapsulated and thus, the four-pole connector is not directly accessible. To gain
access to pin 4, an adapter with four-pole connector is therefore used (
Figure 55 (b)). Before clicking the adapter onto
the electronics case, a hole is drilled (Ø2 mm, max drilling depth 10 mm) in the cover of the electronics case at the marking
(
Figure 55 (a)). Subsequently, the signal cable is connected to the terminals of the adapter.
(a) (b)
Figure 55. Drill hole marking on ULTRAFLOW® 34 cover (a) and ULTRAFLOW® 34 with adapter 6699-006 (b).