10
6. Retrofitting modules
Both top modules and base modules for MULTICAL
®
61 can be supplied separately
for retrofitting. The modules are configured and ready for installation from the
factory. Some of the modules require individual configuration after installation,
which is possible by means of METERTOOL.
Top module
Possible configuration after installation
RTC (Real Time Clock)
1
Clock adjustment.
RTC + data hourly data logger
5
Clock adjustment.
RTC + M-Bus
7
Clock adjustment.
Primary and secondary M-Bus addresses
can be changed via METERTOOL or M-Bus.
Furthermore, monthly logger data can be
selected instead of yearly logger data via
M-bus.
RTC + 2 pulse outputs for CE and CV + hourly
data logger
8
Clock adjustment. Configuration of pulse
outputs. (Configured from the factory
according to customer requirements)
RTC + 2 pulse outputs for CE and CV + prog.
data logger
B
Clock adjustment.
Configuration of pulse outputs.
Base module
Data + pulse inputs
10
Pulse values of VA and VB are changed via
METERTOOL.
M-Bus + pulse inputs
20
Pulse values of VA and VB are changed via
METERTOOL.
Primary and secondary M-Bus addresses
can be changed via METERTOOL or M-Bus.
Furthermore, monthly logger data can be
selected instead of yearly logger data via
M-bus.
RadioRouter + pulse inputs
21
Pulse values of VA and VB are changed via
METERTOOL.
Prog. data RTC + 4…20 mA
pulse inputs
22
Clock adjustment.
Pulse values of VA and VB are changed via
METERTOOL.
0/4…20 mA outputs
23
Config data must be programmed into the
calculator by means of METERTOOL when
retrofitting. Furthermore, all parameters can
be changed via METERTOOL.
LonWorks, FTT-10A + pulse inputs
24
Pulse values of VA and VB are changed via
METERTOOL. All other configurations are
made via LonWorks.
Radio + pulse inputs
(integral antenna)
25
Pulse values of VA and VB are changed via
METERTOOL.
Radio + pulse inputs
(connection for external antenna)
26
Pulse values of VA and VB are changed via
METERTOOL.
