TECHNICAL DESCRIPTION MULTICAL® 21 & flowIQ® 2101 /..02 /..03
68
Kamstrup A/S •Technical Description • 5512-897_J1_GB • 06.2016
Kamstrup A/S
Att.: Quality and environmental dept.
Fax.: +45 89 93 10 01
Dis-assemble meters, as described below, and the separate parts handed in for approved destruction. Do
not expose batteries to mechanical impact. Also avoid short-circuit of lead-in wires during transport. Also,
see table below:
19.1
Instructions for disposal
Item
Material
Recommended disposal
Lithium cells
Lithium-thionylchloride >UN 3090<
C-cell: 2.0 g lithium
Approved deposit of lithium cells
Printed circuits
(remove LCD-display)
Coppered epoxy laminate,
components soldered on
PCB scrap for metal recovery
LCD-display
Glass and liquid crystals
Approved processing of LCD-displays
Meter housing, measuring
tube, transducer holder
PPS – 40% fibreglass
Plastic recovery
Sight glass
Soda lime glass
Glass recovery
Top cover (type label)
ABS
Plastic recovery
Other plastic parts, casted PC + 10% glass
Plastic recovery
Moisture-absorbent
98% Bentonite
2% Quarz
Ordinary disposal
Packing
APET - (Amorphous Polyethylene
Terephthalate) – also used for storage
of food
Plastic recycling 'Combustible'
Please send any questions you may have regarding environmental matters to:
Kamstrup A/S
Industrivej 28, Stilling
DK-8660 Skanderborg
TEL: +45 89 93 10 00
FAX: +45 89 93 10 01
[email protected]
kamstrup.com