User manual
wM-Bus Dongle SW Tool
The dongle can also be used for non-Kamstrup meters. See appendices for alternative configuration
possibilities. Note that Kamstrup does not offer support if the dongle is used for non-Kamstrup
meters.
3.3
Dongle tab (normally not used for this application)
5512-1
057
GB /
12.2011 /
A1
Figure 4
[Get Dongle Settings]
:
Click this button to read the Dongle set-up data and display it in this window.
OPTIONS
:
M-Bus enabled
:
Tick this checkbox for enabling wired M-Bus
Radio enabled
:
Tick this checkbox for enabling set-up via wireless M-Bus
Encryption M-Bus
:
Tick this checkbox for enabling encryption via the wired M-Bus
Spare bit 3
:
Not used
Spare bit 4
:
Not used
Spare bit 5
:
Not used
Spare bit 6
:
Not used
Dongle initiated
:
Untick this checkbox, and click the [Set Dongle Settings] button under
Actions
to
reset all data in the Dongle to factory defaults. Click the button again for new use.
Dongle AES key
:
Not used for this application.
7
