WZA
School ventilation
Assembly, installation and operating instructions
18
Fasten an appropriate lifting tool to the functional unit.
Position the functional unit on the enthalpic unit.
Remove any lifting tool used.
Use 4 self-locking screws (M8x12) to connect the functional unit and en-
thalpic unit to the corner profiles.
Use 4 earthing cables L= 300 mm to connect the functional unit and en-
thalpic unit to the corner profiles.
Loosen screw TXP 25 from the electrical cover panel and remove the panel.
Refit the casing once the unit has been reassembled.
