10
2.55
ProtecTor
A new dimension in door screening
Installation and operating manual
Please note the following safety-relevant information!
• Disconnect all parts of the system that are being worked on (voltage-free).
Ensure that the system cannot be accidentally re-connected!
• Before commencing installation/maintenance work, wait until all moving
components, such as fans, have come to a final standstill after the unit
has been switched off. After working on the unit, remove any tools, the
short circuit detector or any other objects from the unit.
•
Caution!
Pipes, casings and fittings can become very hot depending on
the operating mode!
•
Caution!
Wear gloves, safety shoes and suitable protective clothing
when transporting the unit! Sharp edges cannot be ruled out despite the
utmost care during manufacture.
• The operator of the unit is responsible for ensuring EMC compliance of
the entire system in accordance with the locally applicable standards.
Protect the products from humidity and temperature fluctuations during
installation and any possible interim storage. Check the use with the man-
ufacturer in case of any doubt.
Fire protection
Please note the statutory requirements in terms of fire protection. The appli-
cable guidelines and standards must be taken into consideration.
Modifications to the unit
Do not undertake any modifications, renovations or additions to the
ProtecTor without discussing them with the manufacturer as they could
impair the safety and operation of the unit. Modifications / alterations may
only be carried out with written approval.
Do not carry out any measures on the unit not described in this manual.
Ensure that all on-site systems and cabling are suitable for connection to the
intended system!
Liability and warranty
• Only use the ProtecTor for the applications indicated in “Intended use”.
• Warranty claims for material and manufacturing defects are only valid if
they have arisen within the warranty period.
• Modifications / alterations may only be carried out with written approval.
• Any warranty becomes void if modifications are made to the unit.
