TP-AIR-UM-09-17-Rev.B
10
EN
Optional AIR Annexe
(Travel Pod Cross AIR only)
An inflatable annexe is available for the Travel Pod Cross AIR. The annexe can
be fitted to either side of the awning, or both.
To Set-up:
1. Remove the relevant side panel from the awning by unpegging and
unzipping the panel.
2. Zip-in the annexe making sure that it is not inside out.
3. Undo the top cap and attach the pump, that came with your awning, to
the inflation valve. The pump has a pressure gauge and the AirPole should
be inflated to 7-8 psi (0.48-0.55 bar).
4. Peg out the annexe starting with the two corners closest to the awning,
then the two far corners and then the intermediate pegging points.
5. Peg out the guy lines.
6. Ensure that the sides and roof of the annexe are taut and re-peg if
necessary.
7. Peg down the four corners of the inner tent groundsheet. Go inside and
hang the inner tent from the “O” rings on the inside of the annexe ensuring
that the door is facing to the front.
