1. Position and attach the AIR Break
Pro to the awning at one or both
ends.
2. If fitted, clip the AIR Break Pro
directly onto the awning and
tighten (see Image 1). Alternatively
utilise the QuickPitch attachment
point(s) by looping the AIR Break
Pro adjustable strap(s) through
them. Pull the strap tight to secure
(see Image 2).
3. Locate the inflation valve on the
central panel. Unscrew the top
cap and attach the pump nozzle
(see Image 3).
4. Once inflated, push or pull the
AIR Break Pro up, allowing the
AirPoles to assume their
correct shape (see Image
4).
5. Inflate the AIR Break Pro
from the inflation valve.
The ideal inflation pressure
is 9psi (0.62 bar).
Set-Up and Take Down
If you are using the AIR Break Pro
freestanding skip Steps 1 and 2
1
2
4
3
WARNING!
If present, never open the zip
on an AirPole inner sleeve
whilst inflated as this will result
in the bladder bursting.
