Kamoer X1 PRO T, Quick Start Manual, Page: 9 / 12

7
4. About 3 seconds later, the blue light will flash intermittently every 2 seconds,
indicating that the device is in the network. click the "
The blue light is flashing slowly
and intermittently " icon on the App interface, and complete the network
configuration according to the interface prompts.
5. After the connection is successful, the App will prompt that the connection is
successful. At this time, the status indicator (blue light) is on, indicating that
micropump has been connected to the cloud, and the user has also completed the
binding with X1 PRO T.
Bind X1 PRO T
There are two ways for user to bind the device.
Method 1: Bind the dosing pump through the network configuration described above.
Method 2: If the dosing pump is connected to the cloud through the router, the mobile phone
can be connected to the wireless router, and the App will scan and display the locally available
dosing pump. The user directly clicks the "
Bind " button on the right side of the dosing pump to
complete the binding.
Unbind X1 PRO T
A long press with the corresponding device icon on the device list page, the "Delete" icon will
pop up at the bottom, click the "Delete" icon to unbind.
Notes

Please use the power adapter provided by the product and work under the specified
working environment

This product only supports 2.4G Wi-Fi, not 5G Wi-Fi.

Micropump should be placed in a close position to ensure that the height difference
between the liquid inlet and the liquid outlet is within 0.5 meters.

The connecting pipe for the liquid inlet should be as short as possible, the connecting
pipe for the liquid outlet should be suspended above the liquid being dosed.

Check dose lines are in the right direction on pump inlet outlet before using dose unit.