7
Connect X1 PRO 2 to the cloud
The dosing pump is powered on for the first time after unpacking, and the status indicator light
(blue) flashes slowly. You then need to use the App to connect the micropump to the cloud
through a wireless router. The steps are as follows:
1.
Ensure that the wireless router has connected to the Internet. The mobile phone is
connected to the 2.4G Wi-Fi hotspot of the wireless router (the device does not support 5G
Wi-Fi, and 5G Wi-Fi hotspots cannot be used)
2.
Open the Kamoer Remote App, log in with the registered account, click the "
+
" icon in the
upper right corner, select "
Add Device
", select "
X1 PRO 2 Dosing Pump
" in the list of
supported devices to add.
3.
After entering the router Wi-Fi password, click the "
Next
" button, press and hold the Reset
button on the front panel for more than 6 seconds, then release it, click the "
Next
" button,
and wait for the blue status indicator to flash;
4.
If the indicator light continues to flash rapidly (configure network by router), select the
"
The blue light is flashing fast and continuously
" icon on the App interface, click the
"Next" button, and wait for the network configuration to be completed.
5.
If the indicator is flashing slowly at a frequency of on for 0.2 seconds and off 2
seconds(configure network by AP), select the "
The blue light is flashing slowly and
intermittently
" icon on the App interface, click the "Next" button, and complete the
network configuration according to the interface prompts.
6.
After the connection is successful, the App will prompt that the connection is successful. At
this time, the status indicator (blue light) is on, indicating that micropump has been
connected to the cloud, and the user has also completed the binding with micropump.
Binding X1 PRO 2
There are two ways for user to bind the X1 PRO 2.
Method 1: Bind the dosing pump through the network configuration described above.
Method 2: If the dosing pump is connected to the cloud through the router, the mobile phone
can be connected to the wireless router, and the App will scan and display the locally available
dosing pump. The user directly clicks the "
Bind
" button on the right side of the dosing pump to
complete the binding.
Summary of Contents for X1 PRO 2
Page 2: ......