Outpost: Setup Instructions
Page 3
Outpost Setup
Remove your Outpost
from the bag.
Attach the middle section of the structural ridgeline.
1
4
5
Setting up the Outpost
Telescope the legs to the approximate desired height by
pressing the top of the release lever.
3
With the “A” frame legs resting on the ground, lift
the receiver end of the structural ridgeline and drop
it onto the ball hitch mount.
6
Press the spring pin buttons on the main pivot joint in, one at
a time, to deploy the legs into the open and locked position.
2
Attach the ball receiver section of the structural ridgeline.
WARNING:
Max Weight Capacity 350 Lbs. USE HAMMOCK STAND WITH CAUTION. INHERENT RISKS EXIST. Do not modify the
stand or hammock in any way; modification may result in failure or injury and will void your lifetime warranty.
