32
ENGLISH
33
ENGLISH
5. Installation – inserting the batteries (Type “AAA”)
1. Make sure that the device is switched off.
2. Open the battery compartment lid on the rear side of the
Micro Game Power 40in1 console.
3. Remove the used batteries and dispose them properly.
4. Insert three AAA batteries. Ensure that the polarity (+ and -)
corresponds to the icon in the battery compartment.
5. After having inserted the batteries, close the battery compartment
lid again.
AAA DC 1,5 V
AAA DC 1,5 V
AAA DC 1,5 V
AAA DC 1,5 V
AAA DC 1,5 V
5.1 Battery warning
1. Always insert the batteries with the correct polarity.
2. Only use batteries that are recommended for the device.
3. Never mix old with new batteries.
4. Never mix “Alkali-Mangan”, “Zinc-Carbon” or rechargeable
“Nickel-Cadmium” batteries.
5. Always use batteries safely and properly.
6. Do not use the batteries or the device in connection with open fi re
or other heat sources, in order to avoid explosion risks.
7. Remove the batteries from the device if you do not use the latter for
an extended time.
8. Empty batteries must be removed from the device immediately.
9. Do not short-circuit or modify the power connectors.
10. Do not try to recharge disposable batteries.
Note:
The manufacturer assumes no liability for damages caused by leaking
or corroding batteries.