Kamesan KS-T2000
13
B
a
tt
eries and
po
we
r
Batte
rie
s
an
d
pow
e
r
Bat
teries and
po
we
r
Batte
rie
s
and
po
we
r
Batt
e
rie
s an
d
po
we
r
Bat
te
rie
s an
d
po
w
e
r
Batte
rie
s
an
d
pow
e
r
Batte
rie
s
a
n
d
po
we
r
1.
Remove the cover on the left (INPUT) side of the unit. You
may need to remove the touch fastener case strap to access
the holder door.
2.
Open the door using the catch located by the red (+) mark,
and remove the battery holder as shown above.
3.
Remove any old batteries in the holder and place new batter-
ies in the holder.
•
Take care that the batteries are inserted correctly as shown
above, with the polarity correct.
•
Never mix batteries of different types, or discarded (or par-
tially-discharged) and new (or freshly-charged) batteries.
•
Always follow the battery manufacturer’s instructions for
charging rechargeable batteries. Never attempt to recharge
batteries which are not designed for this purpose.
4.
Replace the battery holder into the Kamesan KS-T2000 and
close the battery door. Replace the case strap in its original
position.
The battery holder should be inserted with the end with two battery
contacts entering the compartment first, and with the single metal
rivet towards the hinge of the holder door (as shown in the illustra-
tion above.
5.
Test the battery power and polarity with the power switch
(see “Checking the batteries” on page 12).