3
KS-6001
Introduction
Thank you for your purchase of the Kamesan KS-6001. This sub
audio mixer provides a flexible and powerful solution to your
portable mixing needs, accepting up to four balanced micro-
phone inputs, and mixing them into two before passing them to
another mixer via a dedicated hardware connector integrated
into the case design, or through a separate cable.
Power is supplied from an outside source, either through the
mating connector or a dedicated DC inlet.
Before use, please read these operation instructions carefully,
then keep them in a secure place for future reference.
Notes and warnings
The KS-6001 may be used with the Kamesan KS-432 mixer, or
may be operated with a DC power source or external recharge-
able battery pack (up to 16 V output). If the KS-6001 is used
under different conditions, there is a risk of fire, damage to the
unit, or personal injury.
Note the following with regard to external power supplies:
Make sure the polarity of the external powering device is
correct.
Make sure it is properly connected to the KS-432. Damage
to the units may result if the joint connectors are not
properly fitted and the power is turned on.
Also, follow the common-sense precautions below:
Do not allow liquids to come into contact with the unit
or be spilled inside. Should this occur, fire, damage or
malfunction may result.
Make sure that no metal objects or easily inflammable
substances inadvertently get inside the unit through holes
or slots. Should this occur, fire, the unit may become
damaged or start to behave erratically.
Do not attempt to disassemble the unit as damage or
malfunction may result.
Notes on the Operating Environment
Avoid using this unit in places with high heat or high humid-
ity as damage or malfunction may result. When using in an
