s network enable!
When configuring network modules, execute all the
commands you need to configure first and then
execute this command to reboot network modules
r ip addr!
Get the IP address of the network board
a a.b.c.d <CR>
r mac addr!
Get the MAC address of the network board
a a-b-c-d-e-f <CR>
r subnet
！
Get the subnet mask of the network board
a a.b.c.d <CR>
r gateway!
Get the gateway of the network board
a a.b.c.d <CR>
r port!
Get network port number
a 8000 <CR>
s net name ****! Set the name of the network module
*******
r net name!
Get the name of the network module
a ******* <CR>
RS-232 Command
Function description
Feedback
Note:
In this table, you can send “RS-232 Commands” to control the product in any
serial command tool. The “Function description” will explain function about the command.
The “Feedback” will display whether the command sends success and feedback the
information you need to.
18/19
