GENERAL SAFETY AND GUIDANCE
ELECTRICAL SAFETY GUIDANCE
OVERVIEW OF PUMP LAYOUT
230 volt models are fitted with a 13 ampere plug and
may be operated from a standard 230 volt 13 ampere
power supply.
110 volt models must only be operated through a 110
volt transformer of the correct rating to avoid damage
to the motor.
Always use an RCD or plug the pump into a mains socket
protected with a built in RCD.
Switch the power flushing pump and the power supply off
before plugging into the mains electricity supply.
Always switch off the power flushing pump and isolate it
from the power supply when leaving it unattended.
Do not commence using this power flushing pump
until you have read these instructions fully. Ask for
clarification if you do not fully understand its use and
application.
It is the user’s responsibility to ensure that this pump
is suitable for the work to be carried out, and to wear
suitable personal protective equipment.
This pump weighs more than 10kg and should
only be lifted by the handle when empty.
Do not move or drag the pump by its power
cable or the hoses.
Central Heating
Power Flushing Pumps
CF40 Evolution & CF90 Quantum
CLEARFLOW CENTRAL HEATING POWER FLUSHING PUMPS - SAFETY & OPERATING GUIDE
Flow reverser
lever
ON/OFF switch
Fresh water
connection
Combined isolating
& dump valves
Flow & return
Motor
Tank
Dump hose
connection
Overflow
connection
Carry handle
Combined isolating
& dump valves
Water inlet valve
Filler cap
Maximum level
Minimum level
Wheels
