7
Using Your Snugasabug
®
Fitted
Electric Blanket
Before First Use
Remove any promotional material
from the electric blanket.
Securing Your Fitted Electric
Blanket
Place the electric blanket on the
mattress, so that the skirt is visible and
the controller is under the electric
blanket and exits through the skirt
aperture. Ensure the heating wire
section on the electric blanket is clear
of the pillow.
NOTE:
On the models KEB412
and KEB512, the blanket can
be turned over so that the
controller is located on either
side of the bed.
NOTE:
The blanket material
must not be wider than the
mattress with which it is to be
used. It is normal for a small
section of the fitted skirt to be
showing on top of a larger
sized mattress.
Pull the elastic inside the fitted skirt
over the ends of the mattress. Ensure
to pull the middle of the blanket so
that the blanket is evenly stretched
and distributed over the entire
mattress to ensure creases or rucking
is not evident. No heating wire must
be trapped or tucked into any part
of the bed. Ensure the elastic of the
blanket skirt is completely under the
entire mattress and secure.
NOTE:
Ensure that the blanket
is stretched completely flat
when placed on the mattress
and creases or rucking is not
evident.
CAUTION:
No heating
wire must be trapped or
tucked into any part of
the bed.
Fig. 1
Fig. 2
KEB442_IB_A11_FA.indd 7
6/09/11 2:10 PM
