7
Using Your Kambrook Slushie Maker
Before First Use
Remove all packaging material and
promotional labels. Wash the ice
chamber and base in warm, soapy
water, rinse and dry thoroughly. Wipe
the motor body with a damp cloth.
Assembling/Operating the
Slushie Maker
Place water in the freezer container
leaving 1cm from the top to place the
lid on. Then place the container in the
freezer for 24 hours.
Place the motor body on a flat, dry
surface. Ensure the power plug is
unplugged from the power outlet.
Place a deep bowl or container onto
the base platform to hold shaved ice.
Place the ice chamber into the base
by lining up the flat sides and pushing
the chamber down.
Once the water in the freezer
container has set and formed into ice,
remove the freezer container from the
freezer.
Remove the block of ice from the
freezer container. Place the ice in the
ice chamber.
Place the motor body on top of the
ice chamber. Plug the cord into a
230V or 240V power outlet and switch
on at the power outlet.
Push the top of the motor housing
to start shaving. Release the motor
housing to stop shaving. When ice
shaving is complete, unplug the Slushie
Maker and clean. Please see Care,
Cleaning and Storage for directions.
NOTE:
Please handle the
ice chamber carefully as
the shaving blade is sharp.
Mishandling of the blade may
cause injury.
Tips for the Best Use of your
Slushie Maker
Do
• Ensure all removable parts have
been thoroughly washed and
dried before assembly (except
motor body).
• Ensure the Slushie Maker is correctly
assembled before operating.
• Ensure the Slushie Maker is used on
a clean, dry surface.
Don’t
• Do not use ice cubes in the
ice chamber.
• Do not use the ice chamber to
store ice.
• Do not immerse the motor body,
cord or power plug in water or
any other liquid.
• Do not use harsh abrasives
or cleaners.
• Do not place any of the
removable parts in the dishwasher.
