7
Operating Your Kambrook Stick Mixer
Before First Use
Remove any packaging material
and promotional labels.
When unpacking the Stick Mixer
check to see you have received all
the required parts and accessories
as outlined in the parts list before
discarding the packaging.
Wash the Stick Mixer blending shaft
in warm soapy water. Rinse and dry
thoroughly. Ensure no water remains
inside the blending shaft to avoid
water running into the motor body
when the motor body and blending
shaft are assembled.
Disassemble and wash chopper
blade, chopper bowl, chopper bowl
lid, blending jug, mashing attachment
and mashing attachment connector
with warm soapy water, rinse and dry
thoroughly. Ensure no water remains
on the chopper bowl lid to avoid
water running into the motor body
when re-attached.
NOTE:
The detachable blender
shaft, blending jug, chopper
bowl and masher attachment are
dishwasher safe. Do not wash the
mashing attachment connector,
chopper blade, chopper bowl lid
and the motor body of the Stick
Mixer in the dishwasher.
NOTE:
Before placing the
blending shaft back onto the
motor body after washing, make
sure that the blending shaft has
been dried thoroughly.
Stick Mixer Versatility
The Stick Mixer motor body can be
attached to:
• The stainless steel blending shaft –
for use as a hand blender
• The chopper bowl with chopper
blade and lid – for use as a mini
chopper or food processor.
• The mashing attachment – to
conveniently make lump free
mash in a short amount of time.
WARNING:
Do not
immerse the motor unit,
cord, or plug in water or
any other liquid.
WARNING:
All processing
blades are extremely
sharp. Handle with care
and only lift from the shaft.
To Attach the Stainless Steel
Blending Shaft
Align the lock buttons on the drive
end of the motor with the grooves
found at the top of the blending shaft.
Push down to lock into place until an
audible “click” sound is heard to
show that it is secure.
