IMPORTANT PRECAUTIONS
READ ALL INSTRUCTIONS
CAREFULLY BEFORE USING THIS
HEATER.
When using electrical appliances, basic
precautions should always be followed,
including the following:
USE ONLY 230/240V a.c. EARTHED
SUPPLY
• Remove packing supports from
elements before using.
• Keep combustible materials such as
drapes and other furnishing away from
heater.
• Your Radiant Strip Heater is designed
for wall mounting only.
DO NOT mount on ceiling or floor.
• The heater must NOT be located
immediately below a socket outlet.
• Extreme caution is necessary when this
heater is used by or near children or
invalids.
• Young children should be supervised to
ensure they do not play with the
heater.
• Do not leave heater unattended. Always
switch off the heater at the controls
and at the power outlet then unplug
heater from the power outlet when
not in use.
• Do not operate any heater with a
damaged cord or plug, or if heater has
been dropped or damaged in any
manner. Return heater to your nearest
service centre for examination, electrical
or mechanical adjustment or repair.
• Do not use outdoors.
• Place unit well clear of heat sensitive
surfaces
• When in the ON position the neon
light will illuminate.
• Do not run the cord under carpeting
or cover the cord with rugs, runners or
the like. Arrange cord away from traffic
areas and where it will not be tripped
over.
• To prevent a possible fire, allow ample
space around the heater (at least 1.7m
at front) and do not block front grill in
any manner. Check the elements and
grill from time to time for accumulated
dust.
• To disconnect heater switch the
control setting to the OFF position,
then switch off at the power outlet
prior to removing the plug from its
outlet.
• Do not insert or allow foreign objects
to pass through the element guard as
this may cause an electric shock, fire or
damage the heater.
• Do not touch hot metal surfaces.
• DO NOT IMMERSE in any liquid or
allow liquids to be spilt on heater.
• Do not allow power cord to contact
hot metal surfaces.
• Set the control setting to the OFF
position then Unplug from power
outlet and allow heater to cool down
before cleaning or storing.
• Do not use the heater with a
programmer, timer or any other device
that switches the heater on automatically,
since a fire risk exists if the heater is
covered or positioned incorrectly.
2
