background image

4

Kambrook Recommends Safety First

IMPORTANT: Please retain your 

instruction book for future use.

At Kambrook, we believe that safe performance is the first priority in any 

consumer product, so that you, our valued customer can confidently 

use and trust our products. We ask that any electrical appliance that 

you use be operated in a sensible fashion with due care and attention 

placed on the following important operating instructions.

Important Safeguards For Your Kambrook  

Arctic Gunmetal Pedestal Fan 

•  Carefully read all instructions before 

operating the fan for the first time and save 

for future reference.

•  Remove and safely discard any packaging 

material and promotional labels before using 

the fan for the first time.

•  To eliminate a choking hazard for young 

children, remove and safely discard the 

protective cover fitted to the power plug of 

this fan.

•  When unpacking the fan, check to see you 

have received all the items listed in the parts 

list,= before discarding the packaging.

•  Do not place the fan near the edge of a 

bench or table during operation. Ensure that 

the surface is level, stable, clean and free of 

water and other substances.

•  Always ensure the fan is properly assembled 

before use.  Follow the instructions provided 

in this book.

•  This fan is intended for household use only 

and not for commercial or industrial use.

•  Disconnect the power plug before 

dismantling, assembling or before cleaning 

and when the fan is not in use.

•  Avoid touching moving parts of the fan.
•  Never insert fingers, pencils or any other 

objects through the guards whenever the 

power plug is connected, in particular while 

the fan is switched on.

•  The fan must not be used if the guards 

are not fastened correctly, according to 

instructions provided in this book.

•  When positioning the rear grille on the motor 

shaft, always ensure the carry handle on the 

grille is positioned in the upright position.

•  Ensure the fan blade engages fully onto the 

shaft. Please note this may require some 

force to ensure it is fully engaged.

•  The fan must not be used if the base is 

not fastened correctly, according to the 

instructions provided in this book.

•  Do not operate in the presence of explosives 

and/or flammable fumes or liquids.

•  Never leave the fan unattended when in use.
•  Do not unplug the fan by pulling on the cord.
•  Never carry the fan by the cord or yank to 

disconnect from an outlet; instead, grasp the 

cord and pull to disconnect. Do not pull the 

cord around sharp edges or corners.

•  Allow the fan blade to stop completely, 

always switch off at the power outlet, and 

then unplug the fan from the outlet:  

-  Before leaving it unattended 

-  Before attempting to move the fan 

-  Before cleaning and maintenance unless  

   otherwise specified in this booklet 

-  Immediately after use.

•  To prevent damage to the fan, do not use 

alkaline cleaning agents when cleaning, 

uses a soft cloth and mild detergent.

•  Do not place anything on top of the fan 

when assembled, when in use and when 

stored.

•  Store the unit out of reach of children.
•  Keep the fan clean. Follow the cleaning 

instructions provided in this book.

Summary of Contents for KPF449GUN

















Reviews: