9
8
Using Your Kambrook Kettle
Before First Use
Remove any packaging material and
promotional labels before using your
kettle for the first time.
It is recommended before the first use
to fill the kettle to the maximum level
with cold tap water, bring to the boil
and then discard the water.
Your kettle will only operate when
positioned on the power base with
the ON/OFF switch in the ‘ON’
position. The kettle will automatically
switch off once the water has boiled.
Operation Of Your Kettle
1. To fill the kettle with water, remove
it from the power base and open
the lid by pressing the button on
the handle of the kettle and the lid
will lift upwards. Fill with the desired
amount of water. Do not operate
the kettle without water. Always fill
the kettle between the minimum
and the maximum marks on the
water window.
2. Ensure that the lid is closed before
placing the kettle on the power
base.
3. Place the kettle firmly onto the
power base and plug the power
cord into a 230V or 240V power
outlet and switch on.
4. Press the ON/OFF switch to the
‘ON’ position. The power ‘ON’ light
will illuminate.
NOTE:
Never operate the kettle
dry - too little water will result in the
kettle switching ‘OFF’.
Do not overfill the kettle - filling
above the maximum mark on the
water window may result in boiling
water splashing from the kettle.
NOTE:
This kettle must only
be used with the power base
supplied. Use caution when
pouring water from your
kettle,as boiling water will
scald. Do not pour the water
too quickly.
NOTE:
Do not remove the kettle
from the power base during
operation. Ensure the kettle has
switched to the ‘OFF’ position
after the water has boiled
before removing the kettle from
the power base.
5. The kettle will automatically switch
‘OFF’ once the water has boiled.
Lift the kettle from the power base
and pour the water. Take care to
hold the kettle level, especially
when filled to the maximum level.
To re-boil it may be necessary to
wait for a few seconds to allow the
control to reset.
6. The kettle should be stored on
its power base when not in use.
The power outlet should be
switched off and the power cord
unplugged from the power outlet
when not in use.
CAUTION:
This kettle is
designed for the boiling
of drinking quality water
only; never use it to heat
or boil any other liquids
or foodstuffs. The lid
should always be firmly
in place and locked
closed before use.
CAUTION:
Do not
release the lid while the
water is boiling. Ensure
the lid is closed whilst
kettle is in operation.
Safety Boil Dry Protection
The kettle is fitted with a safety
device, which protects against
overheating should the appliance be
operated with insufficient water. If this
occurs the kettle will stop heating and
automatically switch ‘OFF’.
Should this occur, switch off at the
power outlet and unplug. Allow kettle
to cool before refilling. Remove the
kettle from the power base and
add water. Return the kettle to the
power base. The safety device will
automatically reset.
