background image

6

Important Safeguards For All  

Electrical Appliances 

•   Fully unwind the power cord before use.
•  Connect only to a 230V or 240V  

power outlet.

•   Do not let the power cord hang over 

the edge of a bench or table, touch hot 

surfaces or become knotted.

•   To protect against electric shock, do  

not immerse the power cord, power  

plug or appliance in water or any other 

liquid, unless it is recommended in the 

cleaning instructions.

•   The appliance is not intended for use by 

persons (including children) with reduced 

physical, sensory or mental capabilities, 

or lack of experience and knowledge, 

unless they have been given supervision 

or instruction concerning use of the 

appliance, by a person responsible for 

their safety.

•   Children should be supervised to ensure 

that they do not play with the appliance.

•   It is recommended to inspect the 

appliance regularly. Do not use 

the appliance if the power supply 

cord, plug, connector or appliance 

becomes damaged in anyway. Return 

the entire appliance to the nearest 

authorised Kambrook Service Centre for 

examination and/or repair.

•   Any maintenance other than cleaning 

should be performed at an authorised 

Kambrook Service Centre.

•   This appliance is for household use only. 

Do not use this appliance for other than 

its intended use. Do not use in moving 

vehicles or boats. Do not use outdoors. 

Misuse may cause injury.

•   The installation of a residual current 

device (safety switch) is recommended to 

provide additional safety protection when 

using electrical appliances. It is advisable 

that a safety switch with a rated residual 

operating current not exceeding 30mA 

be installed in the electrical circuit 

supplying the appliance. See your 

electrician for professional advice

•   Always turn the appliance to the OFF 

position, switch off at the power outlet 

and unplug at the power outlet when  

the appliance is not in use.

•   Before cleaning, always turn the 

appliance to the OFF position, switch off 

at the power outlet, unplug at the power 

outlet and remove the power cord, if 

detachable, from the appliance and 

allow all parts to cool.

•   Do not place this appliance on or near  

a heat source, such as hot plate, oven  

or heaters. 

•   Position the appliance at a minimum 

distance of 20cm away from walls, 

curtains and other heat or steam sensitive 

materials and provide adequate space 

above and on all sides for air circulation. 

Summary of Contents for KKE625













Reviews: