9
8
Using Your Kambrook 1.7L BPA Free Plastic Kettle
Before First Use
Remove any packaging material and
promotional labels before using your
kettle for the first time.
It is recommended before the first use
to fill the kettle to the maximum level
with cold tap water, bring to the boil
and then discard the water.
Your kettle will only operate when
positioned on the power base with the
ON/OFF switch in the ‘ON’position.
The kettle will automatically switch off
once the water has boiled.
WARNING:
: Do not
operate the kettle on an
inclined surface. Do not
move the kettle while it
is switch on.
WARNING:
Do not open
the lid while the water is
boiling. Ensure the lid is
closed whilst boiling
WARNING:
This kettle is
designed for the boiling
of drinking quality water
only; never use it to heat
or boil any other liquids
or foodstuffs. The lid
should always be firmly
in place and locked
closed before use.
Operation of Your Kettle
1. To fill the kettle with water, remove it
from the power base and remove
the lid by pulling upwards. Fill with
the desired amount of water. Do not
operate the kettle without water.
Always fill the kettle between the
minimum and the maximum marks
on the water window.
2. Replace the lid before placing the
kettle on the power base.
3. Place the kettle onto the power
base and plug the power cord into
a 230V or 240V power outlet and
switch on.
4. Press the ON/OFF switch to the ‘ON’
position. The power ‘ON’ light will
illuminate.
NOTE:
Never operate the kettle
dry - too little water will result in
the kettle switching ‘OFF’.
Do not overfill the kettle – filling
above the ‘MAX’ mark on the
water window may result in
boiling water splashing from the
kettle.
NOTE:
This kettle must only
be used with the power base
supplied. Use caution when
pouring water from your kettle,
as boiling water will scald. Do
not pour the water too quickly.
NOTE:
Do not remove the kettle
from the power base during
operation. Ensure the kettle has
switched to the ‘OFF’ position
after the water has boiled
before removing the kettle from
the power base.
5. The kettle will automatically switch
‘OFF’ once the water has boiled.
Lift the kettle from the power base
and pour the water. Take care to
hold the kettle level, especially
when filled to the maximum level.
To re-boil, it may be necessary to
wait for a few seconds to allow the
control to reset.
6. The kettle should be stored on its
power base when not in use.
The power outlet should be
switched off and the power cord
unplugged from the power outlet
when not in use.