Kambrook KHP1B Instruction Booklet Download Page 6

5

Important Safeguards For All Electrical 

Appliances 

•  Fully unwind the power cord before use.
•  Connect only to 230V or 240V power outlet.
•  Do not let the power cord hang over the 

edge of a bench or table, touch hot surfaces 

or become knotted.

•  To protect against electric shock, do not 

immerse the power cord, power plug or 

appliance in water or any other liquid, 

unless it is recommended in the cleaning 

instructions.

•  The appliance is not intended for use by 

persons (including children) with reduced 

physical, sensory or mental capabilities, 

or lack of experience and knowledge, 

unless they have been given supervision or 

instruction concerning use of the appliance, 

by a person responsible for their safety.

•  Children should be supervised to ensure that 

they do not play with the appliance.

•  It is recommended to inspect the appliance 

regularly. Do not use the appliance if the 

power supply cord, plug, connector or 

appliance becomes damaged in anyway. 

Return the entire appliance to the nearest 

authorised Kambrook Service Centre for 

examination and/or repair.

•  Any maintenance other than cleaning 

should be performed at an authorised 

Kambrook Service Centre.

•  This appliance is for household use only. 

Do not use this appliance for other than its 

intended use. Do not use in moving vehicles 

or boats. Do not use outdoors. 

Misuse may 

cause injury.

•  The installation of a residual current device 

(safety switch) is recommended to provide 

additional safety protection when using 

electrical appliances. It is advisable 

that a safety switch with a rated residual 

operating current not exceeding 30mA be 

installed in the electrical circuit supplying 

the appliance. See your electrician for 

professional advice.

•  Always turn the appliance to the OFF 

position, switch off at the power outlet 

and unplug at the power outlet when the 

appliance is not in use.

•  Before cleaning, always turn the appliance 

to the OFF position, switch off at the power 

outlet, unplug at the power outlet and 

remove the power cord, if detachable, from 

the appliance and allow all parts to cool.

•  Do not place this appliance on or near 

a heat source, such as hot plate, oven or 

heaters.

•  Position the appliance at a minimum 

distance of 20cm away from walls, curtains 

and other heat or steam sensitive materials 

and provide adequate space above and on 

all sides for air circulation.

WARnIng:

 Always keep 

in mind that the hotplates, 

after being switched 

off, continue to radiate 

residual heat for a certain 

period of time.

WARnIng:

 Do not use 

hotplate within reach of 

young children.

WARnIng:

 If the hotplate 

surface is cracked, switch 

off the hotplate to avoid 

the possibility of electric 

shock. Return the hotplate 

to the nearest authorized 

Kambrook Service Centre 

for repair.

Summary of Contents for KHP1B













Reviews: