8
Using Your Hand Mixer
BEFORE FIRST USE
Before first use, remove and safely
discard any promotional labels. Ensure
that you have all parts and accessories
listed in the components list before
discarding the packaging.
NOTE
Ensure the hand mixer is
unplugged and the speed selector
scroll wheel is set to (OFF) before
assembling, cleaning or changing
accessories.
1.
To release the hand mixer from the
snap-on storage case, pull outward
on the corner of the storage case
where indicated at the opening,
while simultaneously pulling upwards
and in the opposite direction on the
handle of the hand mixer. (Fig. 1)
Remove the accessories from the
storage case.
PULL CORNER
TO RELEASE
Fig. 1
2.
Wash the beaters, whisk, dough
hooks and storage case in warm,
soapy water. Rinse and dry
thoroughly. Wipe the motor base
with a slightly damp cloth and dry.
3.
Insert the accessories required for the
mixing task (beaters, dough hooks or
whisk) into the accessory sockets on
the base of the hand mixer.
4.
Accessories should be fitted into
the hand mixer as below:
a.
If using the beaters, they
are interchangeable
and will operate in either
accessory socket.
b.
If using the single whisk, it
will operate when fitted to
either socket.
c.
If using the dough hooks, insert
the dough hook with the collar
into the larger socket and the
non-collared dough hook into
the smaller socket. (Fig. 2)
Fig. 2
WARNING
Dough hooks must be inserted
into the correct sockets as they
are not interchangeable and
incorrect insertion will result
in damage.
NOTE
Always ensure the beaters, whisk
or dough hooks are properly
inserted before operating.
NOTE
Accessories should be removed
using the quick-release trigger,
however, they will detach if
pulled from the hand mixer.
KHM655_IB_FA.indd 8
30/3/20 7:29 am
