background image

6

• Do not process hot or boiling 

liquids – allow liquids to 

cool before placing into the 

processing bowl.

• Do not move the food processor 

while in operation.

• Do not leave the food processor 

unattended when in use.

• Do not place any part of the 

food processor in a microwave 

oven.

• Do not process thin fluids such 

as water, milk, stock, juice, etc., 

above the MAX LIQUID FILL level 

marked on the processing bowl 

as this could result in overflow. 

To reduce the risk of overflow, 

always add drier or thicker 

ingredients to the processing 

bowl prior to adding fluids.

• Do not place anything on top 

of the food processor when the 

lid is on, when in use and when 

stored.

• Keep the food processor clean. 

Follow the Care, Cleaning & 

Storage instructions provided in 

this book.

Important Safeguards 

For All Electrical 

Appliances

• Fully unwind the power cord 

before use.

• Connect only to 230V or 240V 

power outlet.

• Do not let the power cord hang 

over the edge of a bench or 

table, touch hot surfaces or 

become knotted.

• To protect against electric 

shock, do not immerse the 

power cord, power plug or 

appliance in water or any other 

liquid, unless it is recommended 

in the cleaning instructions.

• The appliance is not intended 

for use by persons (including 

children) with reduced physical, 

sensory or mental capabilities, 

or lack of experience and 

knowledge, unless they have 

been given supervision or 

instruction concerning use of 

the appliance, by a person 

responsible for their safety.

• Children should be supervised 

to ensure that they do not play 

with the appliance.

• It is recommended to inspect 

the appliance regularly. Do not 

use the appliance if the power 

supply cord, plug, connector or 

appliance becomes damaged 

in anyway. Return the entire 

appliance to the nearest 

authorised Kambrook Service 

Centre for examination and/or 

repair.

KFP655_IB_C20.indd   6

17/4/20   12:12 pm

Summary of Contents for KFP655





















Reviews: