7
Using Your Kambrook Box Fan
Before First Use
Remove any promotional material
from fan.
Operating Your Arctic
Box Fan
Plug the power cord into a 230V or 240V
power point and switch the outlet on.
The fan will only operate if set to either:
1. The Timer dial is set from OFF to ON
(continuous)
2. Or the Timer dial is set to a pre-set
time up to 120 minutes
Then select Fan Speed as below.
CAUTION:
Never insert
fingers, pencils or any
other objects through
the guards whenever the
power plug is connected,
in particular while the fan
is switched on.
Use the Fan Speed dial to select the
desired air flow speed setting.
0 – The fan is in the ‘OFF’ position
1 – Low
2 – Medium
3 – High
NOTE:
Although the Fan Speed
dial displays two sets of 0, 1, 2, 3,
the settings on each side of the
dial are the same.
NOTE:
For the fan to work,
the Timer dial also has to
be activated, either in ‘ON’
(continuous mode) or in count
down Timer mode.
Setting the Rotating
Air Delivery
The Rotating Air Delivery function
works in all air flow speed settings.
Move the 'ROTATE' switch to the
ON ‘ ’ position. The fan is now in
Rotating Air Delivery mode.
Move the 'ROTATE' switch to the
OFF ‘ ’ position. The fan is no longer
in Rotating Air Delivery mode.
Setting the Timer
The Arctic Box Fan incorporates a
two hour timer that will turn the fan
off after the selected pre-set time
has elapsed.
Turn the Timer dial clockwise to the
desired position to engage the timer
function (up to 120 minutes).
Care, Cleaning and Storage
Always switch the box fan 'OFF' and
disconnect from the power source
prior to cleaning the fan.
To clean the fan, wipe the exterior
with a soft, damp cloth. Never use an
abrasive cleaner.
When not in use, wrap the cord and
place in the storage compartment
at the back of the fan and close the
cover to keep it secure.
Store the fan (preferably in its original
box) in a cool, clean and dry location.
