Kambrook KFA423, Instruction Booklet

Page: 8 / 12

7
Using Your Kambrook Pedestal Fan
Before First Use
Remove any promotional material from
the fan.
IMPORTANT:
When unpacking the fan,
check to see you have
received all the items
listed in the Parts List before
discarding the packaging.
Assembling Your Kambrook
Arctic HV Pedestal Fan
Base and Extension Tube
Assembly
1.
Place the Fixing Tube into the hole
of the Stability Plate (Fig. 1) then
place both under the Base. Place
the Washer on to the Locking Screw
and fit through the hole at the
bottom of the Stability Plate (Fig. 2).
Fig. 1
NOTE: The Washer fits into the
groove on the bottom of the
Stability Plate and is correctly
fitted if the Locking Screw
protrudes from the other side
of the Base leaving enough
thread to screw onto the
Outer Extension Tube.
2.
Fit the Outer Extension Tube on to
the Locking Screw and tighten the
Locking Screw firmly. (Fig. 3).
Fig. 3
3.
Unscrew the Height Adjustment Knob
and pull up on the Inner Extension
Tube to adjust the height, ensuring
that the Height Adjustment Knob is
fully tightened to hold in place before
assembling the Fan Head. (Fig. 4).
Fig. 4
Fig. 2
g