tHERmOstat INstRUCtION:
1. Press the Setting button until the heater is
set to the AUTO mode.
2. To adjust the set temperature, rotate the
Thermostat dial clockwise to increase the
desired temperature and counter-clockwise
to decrease the desired temperature.
3. The desired temperature can be set between
15ºC and 38ºC.
4. When the air temperature reaches 2º above
the set temperature the heater will stop
heating at once and stop blowing after
approximately 15 seconds.
5. When the air temperature drops 1ºC below
the set temperature the unit will reactivate.
saFEtY FEatUREs:
This heater includes an audible alarm to warn
that parts of the heater are overheating. If this
alarm sounds, immediately turn the heater off
and inspect for any objects on or adjacent to
the heater that may cause high temperature. DO
NOT OPERATE THE HEATER WITH THE ALARM
SOUNDING.
thermo Guard Overheating safety Device
Your heater is fitted with a safety device
that switches off the heater in the event of
overheating. Should this heater stop working, turn
off the heater and inspect for blockages in air
inlet or outlets. Wait at least five minutes for the
protection system to reset before attempting to
restart the heater.
If the heater fails to operate or the safety device
switches off again, return the heater to your
nearest service centre for examination or repair.
CaRE aND maINtENaNCE
Always turn off and then unplug the heater
before cleaning.
Use only a clean, dry cloth to clean the
external surfaces of the heater only.
If the heater has collected dust or dirt inside
the unit or around the elements, have the unit
cleaned by a qualified service agent. Do not
operate the heater in this condition.
Do not attempt to open the case of the heater
at any time there are no customer serviceable
parts inside
When not in use, pack the heater, preferably
in its original box for best protection and
store in a cool, clean and dry location.
Regularly clean the air filter at the rear of the
heater.
•
•
•
•
•
•
KCE42_V4.indd 5
15/11/07 12:34:38 PM
