background image

6

Important Safeguards For All  

Electrical Appliances

• 

Fully unwind the power cord  

before use.

• 

Connect only to 230V or 240V 

power outlet.

• 

Do not let the power cord hang 

over the edge of a bench or table, 

touch hot surfaces or become 

knotted.

• 

To protect against electric shock, 

do not immerse the power cord, 

power plug or appliance in water 

or any other liquid, unless it is 

recommended in the cleaning 

instructions.

• 

The appliance is not intended for 

use by persons (including children) 

with reduced physical, sensory 

or mental capabilities, or lack of 

experience and knowledge, unless 

they have been given supervision 

or instruction concerning use of the 

appliance, by a person responsible 

for their safety.

• 

Children should be supervised to 

ensure that they do not play with 

the appliance.

• 

It is recommended to inspect the 

appliance regularly. Do not use 

the appliance if the power supply 

cord, plug, connector or appliance 

becomes damaged in anyway. 

Return the entire appliance to 

the nearest authorised Kambrook 

Service Centre for examination 

and/or repair.

• 

Any maintenance other than 

cleaning should be performed at an 

authorised Kambrook Service Centre.

• 

This appliance is for household use 

only. Do not use this appliance for 

other than its intended use. Do not 

use in moving vehicles or boats.  

Do not use outdoors.  

Misuse may cause injury.

• 

The installation of a residual 

current device (safety switch) 

is recommended to provide 

additional safety protection when 

using electrical appliances. It is 

advisable that a safety switch with 

a rated residual operating current 

not exceeding 30mA be installed in 

the electrical circuit supplying the 

appliance. See your electrician for 

professional advice.

• 

Always turn the appliance to the 

OFF position, switch off at the 

power outlet and unplug at the 

power outlet when the appliance  

is not in use.

• 

Before cleaning, always turn the 

appliance to the OFF position, 

switch off at the power outlet, 

unplug at the power outlet 

and remove the power cord, if 

detachable, from the appliance 

and allow all parts to cool.

• 

Do not place this appliance on or 

near a heat source, such as hot 

plate, oven or heaters.

• 

Position the appliance at a 

minimum distance of 20cm away 

from walls, curtains and other heat 

or steam sensitive materials and 

provide adequate space above 

and on all sides for air circulation.

CAUTION:

 The processing 

blade and reversible 

disc are extremely sharp, 

handle with care at all 

times. Do not place hands, 

knives, or other utensils into 

the feed chute. Always use 

the food pusher to push the 

food down the feed chute.

KFP400_410_IB_C12.indd   6

13/12/12   5:26 PM

Summary of Contents for Essentials KFP400

























Reviews: