10
Always switch off at the power outlet,
and then unplug the kettle from the
power outlet before cleaning.
Cleaning the Kettle Exterior
The outside stainless steel surface of
the kettle may be wiped over with a
damp cloth and polished with a soft,
clean dry cloth.
NOTE:
Do not use chemical, steel
wool, or abrasive cleaners to
clean the inside or outside of the
kettle.
CAUTION:
To prevent
damage to the kettle, do
not use alkaline cleaning
agents when cleaning;
use a soft cloth and mild
detergent.
WARNING:
Never
immerse the kettle base,
switch area, power base
or power supply cord and
plug in water or any other
liquid or allow moisture to
come in contact with the
part.
Care, Cleaning and Storage
Cleaning the Removable
Filter
The Kambrook Stainless Steel 1.8L
Kettle features a removable mesh
filter to filter out scale deposits for
cleaner water. To remove the scale
deposits, remove the filter by opening
the lid of the kettle. Pull the filter
upwards to remove from its position
behind the spout.
The filter can be cleaned by running
under hot water and rubbing with
a soft cleaning cloth or brush. To
replace the filter, simply press the filter
down into the slot behind the spout of
the kettle.
TIP:
The filter could become
damaged with time, please
check regularly and replace if
found damaged.
NOTE:
Ensure the kettle and
water have cooled down before
attempting to clean the filter.
Mineral Deposits and
Discolouration
Due to the large surface area of the
concealed element interior base,
discolouration due to mineral deposits
from tap water may appear more
obvious by leaving a brown stain on
the base. THIS IS NOT RUST.
To remove the discolouration, follow
the instructions “Removing mineral
deposits”.
