7
Using Your Kambrook Captiv12V
Portable Vacuum Cleaner
Before First Use
Remove any promotional material
from the portable vacuum cleaner.
When unpacking the vacuum, check
to see you have received the charger,
charging base and brush tool before
discarding the packaging.
WARNING:
Before
first use, charge your
portable vacuum
cleaner for at least 24
hours. Make sure that the
on/off switch is turned to
the ‘OFF’ position before
charging. Otherwise
the portable vacuum
cleaner will not charge.
To Wall Mount the Portable
Vacuum Cleaner
Charging Base
The Charging Base can be mounted
vertically or placed on a horizontal
surface such as a counter or shelf.
Fig. 1
Follow these steps when mounting
the base:
1.
Pick a convenient position within
1m of an electrical outlet. If the
Charging Base will be mounted
closer to an outlet, wrap any
excess cord on the side of the
Charging Base.
2.
Place the Charging Base against
the wall in the desired location
and mark the centre of one of
the holes.
3.
Drill a 5mm diameter hole
through the centre of the hole.
Push a Plastic Wall Anchor into
the drilled hole.
4.
Insert one of the included screws
and turn it until the screw head is
3mm above the wall surface.
5.
Re-check the hole alignment,
then drill the second hole and
install the other Plastic Wall
Anchor and screw as in steps 3-4.
6.
Slide the Charging Base into place.
Fig. 2
NOTE:
The Charging Base
should be mounted on the wall
so that the pick up canister is
pointed up when the Portable
Vacuum Cleaner is placed in
the charging base.
