background image

7

7. 

Thread the screw through the small 

holes of both the front and back grilles, 

and tighten using the nut provided.

Fig. 2

To Operate the Arctic  

Desk Fan

Plug the cord into a 230V or 240V power 

point and switch on.

NOTE:

 To avoid an electrical circuit 

overload, it is recommended that no 

other appliances are plugged into 

the same circuit as your fan, when it 

is in use.

Use the Controller Switch to select the 

desired air flow speed setting.

0 – The fan is in the ‘OFF’ position
1 – Low
2 – Medium
3 – High

Fig. 3

(KFA210 only offers 2 settings)

Setting the Oscillation

The oscillation function works in all air  

flow settings.
Press down the Oscillation button to 

activate. The fan will begin to oscillate 

from side to side.
Lift the Oscillation button to stop the fan 

from oscillating.

NOTE:

 The Oscillation button is 

located behind the Rear Grille, on 

the Motor head housing.

Adjustable Tilting Head

The Arctic Desk Fan incorporates  

an Adjustable Tilt Head for greater  

air coverage.
To adjust the angle of the head on the 

KFA210, loosen the Control Knob located 

beneath the Motor head housing, select 

the required tilt angle, then tighten the 

Control Knob.
To adjust the angle of the head on the 

KFA211 and KFA213, while securely holding 

the shaft of the fan body, simply lift or 

lower the Motor head housing, the head 

will click as it is being adjusted.

Care and Maintenance

Always switch the Arctic Desk Fan off, 

prior to cleaning the housing, base, grilles 

and blades.
To clean the outside of the fan, wipe the 

exterior with a soft, damp cloth. Never use 

an abrasive cleaner.
When not in use, store the fan (preferably 

in its original box) in a cool, clean and  

dry location.

Summary of Contents for ARCTIC KFA210









Reviews: