2
This tool is designed for cutting metal, plastic and similar materials
in confined spaces. A 75 or 100 mm cutting disc shall be used.
SAFETY AND PRECAUTION
Read these safety instructions before starting to use the tool and follow the instructions
1 Always use impact resistant eye protection when operating a pneumatic tool.
2 Always be aware that hearing protection is recommended at sound levels above
85 dBA, 2003/10/EG.
3 Vibration, repetitive motions or uncomfortable positions may be harmful to your hands
or arms. Stop using any tool if discomfort, tingling feeling or pain occurs, seek medical
advice before resuming use.
4 Keep unqualified persons, children, etc. away from the tool.
5 Never use oxygen and combustible gas as an air supply for the tool which many be
ignited by sparks and cause fire or explosion.
6 This power tool is not intended for use in potentially explosive atmospheres and is not
insulated against coming into contact with electric power.
7 Never use gasoline or other flammable liquids to clean the tool.
8 Do not expose air tools to rain. Do not use air tools in damp or wet locations.
9 When not in use, keep tools in a dry place, either locked up or in a high place,
out of the reach of children.
10 Only qualified and trained operators should install, adjust or use power tools.
11 Do not modify this power tool. Modifications can reduce the effectiveness of safety
measures and increase the risks to the operator.
Summary of Contents for K 9836
Page 1: ...K 9836 Cut off tool 400 mm...
Page 6: ...6 PARTS K 9836...