8
REMOVAL AND INSTALLATION
OF WHEEL BEARINGS
In this application the hydraulic cylinder is used together with the press
tool set K 10204. A detailed work description is included in the manual for
this tool set. Here is a short version:
REMOVAL
1 Measure the inner and outer diameter of the bearing
2 Select press ring (360–385*), center ring (234–245*) and support ring (403-405*)
3 Assemble together with the the other parts according to the illustration.
4 Turn the nut (K 22505) in by hand and secure that all parts are in place before adding
pressure to the cylinder.
* Numbers printed on the parts in K 10204
K 22505
K 10321
360–385*
403–405*
402*
401*
K 22509
K 22510
234–245*