1.
Roll out a tent mat to protect the tent from eg. Grass
stains
2.
Check the contents: Tents, Pump, Curtains, Curtain-
holder, undercarriage, Groundpegs, Vehicle Wallsupport-
poles.
3.
Swipe out the awning so that you reach the front pro-
file, fold down the awning support leg so that you do not
damage the awning. Pull the tent in the front profile.
There are two chainlists on the tent, Ø5 and Ø7mm to suit
4.
Crank in the awning when you have centered the tent.
5.
Connect the pump to one of the cornerleg connectors.
Pump up the tent, thanks to the One Air System, you only
need to pump at one place and the entire tent is filled.
6.
Check the angle of the side and adjust the front legs by
releasing air and pulling the zipper around the leg's skirt
until the leg has the desired height. When this is done, the
airpressure must be lowered into the air ducts by relea-
sing air (done once). After pumping and possibly adjusting
the height of the front legs, hit the dents and tighten the
stormlines.