Modification not authorized
Never modify this product or release the limit devices
(which limit engine speed, fuel injection quantity, etc.).
Such modification or release will impair the safety and
performance of the product and functions and result in
shorter engine life.
Disposal of waste materials
Put waste oil or drainage in a container. Never dispose of
waste oil or drainage to the outdoors, into a sewer, river,
or the sea.
Dispose of waste materials safely observing relevant
regulations and laws. Ask a specialized waste recovery
company for collection and disposal.
NOTICE
NOTICE
- -
2. Replacing cooling water
Beware of scalding by hot water
Wait until the temperature goes down before draining the
cooling water. Otherwise, hot water may splash to cause
scalding.
Cooling water contaminated with rust or water scale reduces the cooling effect.
Even when antifreeze or anti-corrosive agent is mixed, the cooling water gets
contaminated due to deteriorated ingredients. Replace the cooling water at least
once a year.
(1) Draining cooling water: See 4.7.1
2
.
(2) Adding cooling water: See 3.4.
3. Checking and adjusting intake/exhaust valve head clearance
As this adjustment requires special knowledge and skill, consult with your dealer
or KAMA distributor.
This adjustment is needed to correct deviated intake/exhaust valve open/close
timing.
Negligence of this adjustment will cause noise generation from the engine and
poorer engine performance.
4. Checking and adjusting fuel injection valve
As this adjustment requires special knowledge and skill, consult with your dealer
or KAMA distributor. This adjustment is needed to obtain the optimum injection
pattern for full engine performance.
CAUTION
-
-
