KAMA-LABS KATUSHA v2, Assembly Manual

Page: 41 / 45

If you will press First Button shortly and then press Second Button,
you can change date show parameters. Date can be shown every 5
minutes or 10, or be turned off.
How to set alarm? Lightly!
Similarly like date setup. Moreover, you can turn on/off alarm here.
How to change parameters? Readily!
1) Press and hold Second Button
2) You will see number of parameter and value of parameter in
second tubes:
1 2
1.0
2 4
3) Press Third Button for change value
4) Press Second Button for go to next parameter
№ Parameter Value
1 12/24 time format 0 - 12h time format
1 - 24h time format
2 Date format 0 - DD.MM.YY
1 - MM.DD.YY
3 Hi.Hour tube fading 0 - enable fading
1 - disable fading
4 Effect of change digit
influence to 1 digit or to all
digits
0 - 1 digit
1 - all digits
5 Temperature units 0 - °C
1 - °F
6 Correction of temperature
coefficient
Current temp. - temp.coeff. = real
temperature
How to setup led backlight? Airily!
1) Press and hold
Third Button
2) You will see CLR text on tubes
3) Press First Button to change brightness of bottom leds
4) Press Second Button to change brightness of top R G B leds
5) Press Second Button to set next color of R G B leds
How to change effect of time show?
Just press Third Button and choose effect what you like.