Thank you for purchasing this product, we are sure that it will serve you for many years to come.
To optimise the performance of this product, please read these operating instructions carefully to
familiarise yourself with the basic operations of this unit.
This unit has been tested at the factory before being shipped to you. There is no assembly required.
To prevent or reduce the risk of electrical shock or fire, do not expose this unit to high temperature and
rain or moisture.
Unpacking
Please unpack your new product carefully, your new product should reach you in perfect condition. Please check
that no damage has occurred during transit. If any damage is found, do not operate your unit. Please contact the
retailer you purchased it from immediately.
Safety
If there is any damage to the mains cable (if applicable) do not use the device. Always disconnect the unit from the
mains supply when carrying out any servicing or cleaning of the unit.
Connections and controls
Kam ZP10 passive speakers
6.35mm jack audio input and 6.35mm jack audio output/link
Kam ZP12 passive speakers
Speakon audio input and Speakon audio output/link
Kam ZP10A active speakers
6.35mm jack line level input and 6.35mm jack line level output/link
XLR microphone input
Jack audio output
Power On LED
Master volume
Microphone/line input gain
Kam ZP10A active speaker input and output panels
Kam ZP Wedge series
Passive and active foldback wedge monitors
2
