Unit features
1.
Microphone balanced input
with volume/level control (combined 1/4 inch jack and XLR)
This input can either take a 1/4 inch jack or XLR balanced cable. An XLR Cable is included with the microphone.
2.
Instrument/Microphone 2 input
with volume/level control (1/4 inch jack)
This mono input accepts a 1/4 jack input such as a microphone, guitar or other musical instrument.
3.
CD/Tape or iPod input
with volume/level control (stereo RCA)
This knob controls the level of the CD/Tape or iPod input. This stereo RCA input can be used to connect a CD
player, MP3 player or other audio source. To connect to a portable device with a 1/8 inch headphone jack, you will
need a standard (1/8 inch to RCA) adapter which is not included.
4.
Equalisation control
(EQ).This is a 3-band equaliser that allows you to adjust the frequency response of the
main bus signal.
5.
Master volume control.
This knob controls the master volume of the system.
6.
iPod charge switch.
Switch to ON to charge the iPod battery.
7.
Power input
(IEC). Insert the included power cable here to charge the unit. Note that the system can run off the
mains power while simultaneously charging the battery. The indicator illuminates when the battery is charging.
8.
Power switch.
Turns the unit ON or OFF.
9.
Link output.
This 1/4 inch jack can be connected to the system input of an amplifier or amplified loudspeaker
such as another system.
10.
Battery level indicator.
While the unit is powered ON, these four lights indicate the power remaining in the
battery. Battery life varies based on volume and usage.