Remote control operation
Choose IR mode on laser unit
1. Press the
Menu
button on the rear of the laser unit to enter mode options.
2. Select the System settings (
SYS
), then choose
irEn
.
3. Ensure that the
On
option is selected, then press the
Enter
button to confirm the setting.
A.
On/Off button
Press button to unit on or off (blackout).
B.
Sound button
Press button to activate Sound-to-Light mode. The unit will play Sound-to-Light Auto shows randomly.
Press the button again to change shows.
To adjust the mic sensitivity, press
Music
button for 2 seconds. Use the
1-9
numeric buttons to increase or decrease sensitivity.
9 is the highest sensitivity.
C.
Auto button
Press button to activate Auto mode. The unit will play Auto shows. Press the button again to change shows.
D. & E.
Colour buttons
Press buttons to cycle through laser’s available colours.
F.
Pause button
Press button to pause the laser effect.
G.
Mode buttons
– Time / Countdown / Text
Press the
A
button
once
to enter
Time mode.
Press the
A
button
again
to cycle between
Year, Month, Day, Week
and
Time
.
Press the
A
button
for two seconds to enter into Time adjust mode. When the number flickers, press one of the numeric buttons
(
H
) to change the value. Use the
D/E
buttons to move on to the next digit. Press the
A
button to save your changes.
Press the
B
button
once
to enter
Countdown mode.
Press the
B
button
for 2 seconds, you can then adjust the value by 1-9, then press the
B
button to start counting down.
Press the Pause button (
E
) to stop the Countdown.
Press the
C
button
once
to enter
Text mode.
Press one of the numeric buttons (
H
) to save the text.
H. Use the
0-9
numeric buttons for single number and double number settings.
I. Pressing this key activates the
Mirror
adjustment. Each time you press it, the mirror direction changes. When you have it the
way you wish, discontinue pressing the button.
Any or setting will be saved in RAM, until the unit is turned off.